Top Tips for Installing Sliding Wardrobe Doors

With a good set of instructions to hand, installing your own sliding wardrobe doors doesn't need to be as complicated as you might imagine.

Here are just a few tips and pointers to get you started:

Preparation – As with any DIY job, the better your planning and preparation, the smoother the job is likely to go. Measuring up will be a vital part of this, because millimetres really will make a difference, especially if it’s too wide or too narrow! Your measurements at home will need to be accurately relayed to whoever you are purchasing your sliding door kit from.

Before your kit arrives, you could prepare the site in advance by (if required) cutting sections out of the skirting and cornices which will allow the frame to fit. Some gentle skills with a Stanley knife and a small chisel and hammer will be needed as you tackle these areas.

It’s also a good idea to clear the decks and to allow plenty of room in which to work and manoeuvre.

Assistance – Ideally, installing your new sliding wardrobe doors is a job for two pairs of hands, so make sure you have enlisted the help of a co-worker before you attempt to hang any of the doors.

Instructions – No matter how tempting it might be to disregard the instructions and forge your own independent path to successful wardrobe installation, don’t! More time spent with instructions in hand now (provided they are coherent) is less time spent pulling hair later on.

Tools of the trade – We have already hinted at some of the tools that will come in handy for the job and it is well worth knowing how many tools and which kind you will need before beginning the assembly process. You don’t want to be half way through and realise you can’t continue because you haven’t got the appropriate tool to hand.

Contents Check – Before you begin, it’s worth knowing that all of the pieces that are supposed to be in the pack are in the pack! A missing screw can put the job on hold as quickly as an absent screwdriver. By checking the contents, you will also begin to build up a picture of what needs to go where.

Hanging doors – Once the frame is in place you are ready to hang the door/s. Tilt the door towards the wardrobe and slot it into the top track. Swing the bottom of the door into place and gently lower this into the bottom track. Rinse and repeat with other doors.

Adjustments – If something isn't quite right when the doors are in situ, you can make small adjustments to the height of the doors by moving the screws that are found on the top side of the bottom wheels.

Admiration – Clear up, sit back and admire your handiwork!

For more installation tips and to see a full range of made to measure wardrobes, please visit our main website at Slide Wardrobes Direct.